Audio-Technica brings you best-in-class battery life – again. The ATH-CKS50TW2 next-generation earbuds provide all the powerful, full-spectrum sound of the originals with even greater convenience.
Best-in-Class Battery Life
Up to 65 hours of on-the-go power
You get up to 65 hours of playback: 25 hours from the fully charged earbuds, plus an additional 40 hours available from the charging case (or 15 hours from the headphones and 25 from the case when noise cancelling is enabled). Charging for just 5 minutes gives you up to 90 minutes of use.
Superior Sound
Proprietary 9 mm drivers
At Audio-Technica, we place an emphasis on sound quality, not just convenience. We’ve engineered our 9 mm high-definition drivers exclusively for the ATH-CKS50TW2 to deliver clear, full-range audio with deep, powerful bass.
Magnetic Switch™ Technology
Conserve Power
The unique magnetic technology in these earbuds helps you conserve power without the charging case when you’re out on the go. To turn the earbuds off, simply snap them together via their built-in magnets. When you’re ready to use again, pull the earbuds apart to turn them back on.
Customize Your Listening Experience
Personal Sound Space
The ATH-CKS50TW2 lets you control your sound space. Apply the digital hybrid noise-cancelling function to focus on work, the hear-through function to listen to music while remaining aware of your surroundings, the talk-through function to accentuate the voices/announcements around you, or the unique soundscape function to produce sounds for concentrating, relaxing or meditating.
Added Control
A-T CONNECT App
Using the ATH-CKS50TW2 with the Audio-Technica CONNECT app gives you access to many additional functions, such as the low latency mode, ambience control (noise-cancelling, hear-through and talk-through), EQ, voice assistant, and more!
Features
Specifications | |
---|---|
Bluetooth® Version | Bluetooth version 5.3 |
Notes | For product improvement, the product is subject to modification without notice. |
Accessories Included | USB charging cable (50 cm (20"), USB Type-A / USB Type-C), Eartips: (XS, S, M, L) |
Notes | For product improvement, the product is subject to modification without notice. |
Water-Resistant (drip-proof) Performance | IP55 Headphones only. |
Microphone Polar Pattern | Omnidirectional |
Power Supply | Headphones: DC 3.85 V lithium-ion battery (built in) Charging case: DC 3.85 V lithium-ion battery (built in) |
Microphone Frequency Response | 100 to 8,000 Hz |
Microphone Sensitivity | -38 dB (1V/Pa, at 1 kHz) |
Microphone Type | MEMS type |
Operating Temperature | 5 °C to 40 °C (41 °F to 104 °F) |
Type | Dynamic |
Driver Diameter | 9 mm |
Frequency Response | 5 to 20,000 Hz |
Sensitivity | 110 dB/mW |
Impedance | 20 ohms |
Weight | Headphones: approx. 7.2 g (0.25 oz) (L side), approx. 7.2 g (0.25 oz) (R side), Charging case: approx. 51.5 g (1.8 oz) |
Charging Time | Headphones: Approx. 2.5 hours Charging case: Approx. 4 hours (USB charging), Approx. 7.5 hours (wireless charging) Depends on operating conditions. |
Operating Time | Continuous transmission time (music playback, noise-cancelling off): Max. approx. 25 hours (headphones) Max. approx. 65 hours (if charging case is used in combination) Continuous transmission time (music playback, noise-cancelling on): Max. approx. 15 hours (headphones) Max. approx. 40 hours (if charging case is used in combination) Depends on operating conditions. |
Transmission Band | 20 Hz to 20,000 Hz |
Supported Bit Rates | 16 bit |
Maximum Communication Range | Line of sight - approx. 10 m (33') |
Maximum RF Output | 10 mW EIRP |
Frequency Band | 2.4 band (2.402 GHz to 2.480 GHz) |
Modulation Method | GFSK, Pi/4DQPSK, 8DPSK |
Spread Spectrum Method | FHSS |
Compatible Bluetooth Profiles | A2DP, AVRCP, HFP, TMAP |
Support Codec | AAC, SBC, LC3 |
Supported Content Protection Method | SCMS-T |
Supported Sample Rates | 44.1 kHz, 48 kHz |