High-end Class D amplifier.
EXCEPTIONAL COMPONENTS
The FPS 1500 amplifier is equipped with a remote control for adjusting the volume and muting the subwoofer.
Other advantages: the FPS 1500 can be used in direct mode, it is stable at 1 Ohm, and it also has a 100% MOSFET schema.
REVEAL THE FULL DYNAMICS OF YOUR CAR AUDIO SYSTEM
Focal recommends connecting the optional High Cap module to your FPS 1500. This external power supply module increases operating current capacity to take full advantage of your system’s dynamics, and to give you full control of your speaker drivers, regardless of your power requirements.
Specifications | |
---|---|
Subsonic crossover | Variable from 20 to 50Hz (24dB/oct.) released |
Bandpass crossover | - |
Low-pass crossover | 50Hz - 500Hz |
High-pass crossover | - |
Input sensitivity | 0.2V - 5.2V |
Damping factor into 4 Ω at 100Hz | 220 |
Crosstalk (@ 1kHz - 10V - 4 Ohms) | - |
Distortion into 4 Ohms @100Hz (with 22kHz low-pass) | < 0.15% between 5 and 270W |
Distortion into 4 Ohms @1kHz (with 22kHz low-pass | - |
Signal/noise ratio (@CEA power) | 87dBA |
Frequency response (-1dB) in direct mode | 10Hz - 2.5kHz |
RMS power in bridged mode - 14.4V 2Ω - THD+N < 1% | - |
RMS power in bridged mode - 14.4V 4Ω - THD+N < 1% | - |
RMS power - 14.4V 1Ω - THD+N < 1% | 1 x 800W |
RMS power - 14.4V 2Ω - THD+N < 1% | 1 x 550W |
RMS power - 14.4V 4Ω - THD+N < 1% (CEA 2006) | 1 x 325W |
Direct mode | Yes |
Bass boost level | 0/+9dB linear |
Bass Boost center frequency | 45Hz |
Variable phase (SUB) | 0-180° linear |
Remote control | Yes |
Protections | Short-circuit Thermal overload (76°C) Soft clipping High voltage Polarity reversal |
Dimensions (H x L x D) | 59 x 353 x 254mm |