5-Channel Class D Marine System Amplifier with Integrated DSP, 75 W x 4 @ 4 Ω + 300 W x 1 @ 2 Ω - 14.4V
Engineered to deliver reference-grade audio performance in marine environments, every MVi amplifier unites our cutting-edge NexD2™ switching amplifier technology with an integrated, full-featured digital signal processor.
Equipped with our second-generation NexD2™ technology, the MV700/5i is capable of powering a complete marine audio system. It can drive four main speakers with 75 W x 4 @ 4 ohms, while also powering a subwoofer with up to 300W @ 2 ohms. Bridging the main channels transforms it into a very powerful, 3-channel system amplifier with up to 200W x 2 @ 4 ohms on the main channels and 300W @ 2 ohms on the subwoofer channel.
The NexD2™ full-range technology in the main channels of this amplifier is DSP-controlled and features a reduced loop area design utilizing DirectFET™ outputs for outstanding fidelity, very low noise and exceptional efficiency. The subwoofer channel features an optimized low-frequency variant of the NexD2™ technology. The amplifier chassis is a ultra-compact, cast alloy design with marine-grade powder coat finish and corrosion-resistant hardware.
Instead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TüN® Software application installed.
Amplifier includes: Power Connector (for 4 AWG wire), Speaker Output Harnesses (2), Subwoofer Output Harness, 6 ft A/B USB Cable
Features:
Unprecedented, Onboard DSP Tuning Power!
2nd-Gen NexD2™ Switching Amplifier Technology
Ultra-Versatile Analog and Digital Inputs/Outputs

JLid™ System Command and Control with Networking Capabilities
Proprietary JL Audio protocol provides control interface and all communication for VXi amplifiers and optional JLid™ accessories, including:
Rated Continuous (RMS) Power @ 14.4 V
Main Channels @ 4 Ω | 75 W RMS x 4 |
Main Channels @ 2 Ω | 100 W RMS x 4 |
Main Channels - Bridged @ 4Ω | 200 W RMS x 2 |
Subwoofer Channel @ 4 Ω | 180 W RMS x 1 |
Subwoofer Channel @ 3 Ω | 240 W RMS x 1 |
Subwoofer Channel @ 2 Ω | 300 W RMS x 1 |
Subwoofer Channel @ 1.5 Ω | N/A |
Rated Continuous (RMS) Power @ 12.5 V
Main Channels @ 4 Ω | 60 W RMS x 4 |
Main Channels @ 2 Ω | 90 W RMS x 4 |
Main Channels - Bridged @ 4Ω | 180 W RMS x 2 |
Subwoofer Channel @ 4 Ω | 180 W RMS x 1 |
Subwoofer Channel @ 3 Ω | 240 W RMS x 1 |
Subwoofer Channel @ 2 Ω | 300 W RMS x 1 |
Subwoofer Channel @ 1.5 Ω | N/A |
General Specifications
Frequency Response (Main Channels) | 12 Hz - 24 kHz (+0, -1dB) |
Frequency Response (Subwoofer Channel) | 12 Hz - 1 kHz (+0, -1dB) |
S/N Ratio, referred to highest rated power (Analog Inputs - Main Channels) | 99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
S/N Ratio, referred to highest rated power (Analog Inputs - Subwoofer Channel) | 99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
S/N Ratio, referred to 1 W (Analog Inputs - Main Channels) | 80 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
S/N Ratio, referred to 1 W (Analog Inputs - Subwoofer Channel) | 72 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
Damping Factor @ 4 Ω | >150 / 50 Hz |
Damping Factor @ 2 Ω | >50 / 50 Hz |
THD+N @ Rated Power (Main Channels) | <1% @ 2 Ω per Ch. |
THD+N @ Rated Power (Subwoofer Channels) | <1% @ 2 Ω per Ch. |
Input Voltage Range @ RCA Inputs | 250 mV - 16 V RMS |
Min.Copper Power / Ground Wire Gauge | 4 AWG wire |
Fuse Rating | 60 A (AFS, AGU or MaxiFuse™) |
IP Rating | IPX2 (when mounted vertically with connections pointed downward) |
Physical Specifications
Height (H) | 2.05 in / 52 mm |
Width (W) | 13.96 in / 355 mm |
Depth (D) | 6.93 in / 176 mm |
Net Weight | 5.6 lb / 2.54 kg |